| |
Tray Dryers
Rotary Vacuum Dryer
Vacuum Tray Dryer |
Tray Dryers - Rotary Vacuum Dryer: Exporter and supplier of rotary vacuum dryers, vacuum dryers, rotary dryers, industrial dryers, rotary vacuum drying system, rotary vacuum dryer, rotary drying system, industrial air dryer manufactures in ahmedabad, rajkot, surat, baroda, jamnagar, gujarat, mumbai, delhi, india. |
|
|
|
|
|
|
|
|
| |
| Description : |
| |
|
PREMIUM Tray Dryer is a direct heated type dryer for solid or liquid materials. Drying is carried out by forced air circulation in a cross-flow heating system. Strip heaters (for electrical heating) or steam tube coils (for steam heating) are mounted on both sides of the dryer. Depending on the working temperature required, adequate insulation thickness is provided to achieve the best efficiency. |
|
| Application : |
In pharmaceutical, food, chemical, dyestuff and allied industries.
|
|
| Insulation : |
Fiberglass wool between the double-walls of the body and door.
|
|
 |
|
| Construction : |
Body - M.S. Sheets forming double walls, fixed on inner and outer angular framework of M.S.Door - Also of double-walled M.S. Sheets, with specially designed hinges to enable it to sit flush with the body when closed. Latch is provided.Trays - Size ( 800 x 400 x 30 mm ) ,offered in M.S., S.S., G.I., Alluminium, FRP, or Polypropylene. Trolley - Made from M.S. angle, can, accommodate 48 trays each. Finish - Spray-painted with heat resistant alluminium finish inside and hammertone grey finish outside.
|
|
| Heating : |
Electric Heating - A bank of strip heaters on both sides of the dryer. Dryers up-to 250oC working temperature are offered. Steam Heating - A steam coil of continuous finned tubes(tested at 300 psi.). Dryers are working temperature of 100oC are offered. Electrical-Cump-Steam Heated are also available.
|
|
| Temperature Control : |
An electronic temperature indicator is provided. A thermostat for the electrical heating or a steam controller (thermostat ) operated solenoid valve) provides temperature control.
|
|
| Electrical Switchgear : |
This ensures automatic operation of heaters and locking them with fan motors. The ‘On’ position of the heaters and motors is indicated by a lighted pilot lamp.
|
|
| Control Panel : |
The Switchgear, temperature indicator and control devices are mounted on a control panel located in an easily accessible position.
|
|
| Optional : |
The following may be provided at extra cost : |
-
Chlorinated rubber paint or epoxy based paint for the inside of the dryer to combat acidic and alkaline properties of the materials to be handled.
-
Spare trolleys and trays.
-
Steam fitting like traps, strainers, pressure gauge and valves.
|
| |
|
| Technical Specifications : |
| MODEL |
OVER ALL
OUTER DIMENSIONS
(W x D x H)mm |
CAPACITY OF
OVEN IN
TRAYS |
RATING OF
OVEN
K.W. |
FAN
NO'S |
MOTOR
NO'S |
RATING
H.P. |
NO'S
OF
TROLLEYS |
| PTD-12 |
1470 X 605 X 925 |
12 |
3 |
1 |
1 |
0.5 |
- |
| PTD-24 |
1470 X 960 X 925 |
24 |
6 |
2 |
1 |
0.5 |
- |
| PTD-48 |
1925 X 1010 X 1925 |
48 |
9 |
1 |
1 |
1 |
1 |
| PTD-96 |
2940 X 1010 X 1925 |
96 |
18 |
2 |
2 |
1 |
2 |
| PTD-192 |
2940 X 1925 X 1925 |
192 |
36 |
4 |
2 |
1.5 |
4 |
- FISH MEAL
- SLAUGHTER HOUSE WASTE
- MIXED POULTRY OFFAL
- MIXED MEAT OFFAL & BONES
- WET FEATHERS
Salient Features
- Ideal for heat sensitive materials/ indirect heating.
- Low steam consumption and low drying time.
- Evaporation temperature above 4 Kg./ Hr/Sq. Mtr at 100 C temp.
- Hollow shaft/ paddles
- Heat exchanger/condenser.
- Receiver and adequate instrumentation.
|
 |
 |
PREMIUM ROTARY VACUUM DRIER is designed and manufactured for sterilization, Hydrolisation and DRYING of STRAY FISH, MEAT REJECTS from POULTRY PROCESSING/ MEAT PROCESSING UNITS.
This equipment is manufactured in FOUR STANDARD sizes, special size can be designed and manufactured to suit the specific requirement.
The equipment is manufactured and tested as per PRESSURE VESSEL REGULATIONS.
The equipment is supplied with necessary condenser, Receiver valves, instruments, safety valves, insulations and appropriate vacuum pump.
|
Technical Specifications :
Model |
Volumetric
Capacity |
Overall
Dimensions
mm |
Heat
Transfer Area
M2 |
Motor
H.P. |
| PRVD -2 |
2000 Ltrs. |
1100 x 2250 |
7.53 |
15 |
| PRVD -3 |
3000 Ltrs. |
1150 x 3050 |
10.79 |
20 |
| PRVD -4 |
4000 Ltrs. |
1300 x 3250 |
13.19 |
25/30 |
| PRVD -5 |
5000 Ltrs. |
1400 x 3500 |
15.31 |
40 |
Note :
- SPECIFICATIONS & DESIGNS ARE SUBJECT TO CHANGE WITHOUT NOTICE FOR ANY ADDITIONAL IMPROVEMENT.
- THESE DRIERS CAN BE SUPPLIED SMALLER/BIGGER SIZES FOR DIFFERENT APPLICATION.
|
| Steam Generator/ Water Softening Plant |
An appropriate STEAM BOILER is required to generate sufficient steam required for DRIER, HOT WATER GENERATOR may be required for certain applications.
The BOILER should be with water softening plant, oil storage service tank and oil pump etc. If required ELECTRIC Panel, STRUCTURALS/FOUNDATIONS by Client. |
|
|
|
| |
|
|
